Physics of Crash in Automobile Structures.

-
  • Structural Deformation in Crash


  • Crush Space Measurement

Static Crush Space = Free Crush + Crushed Components

Dynamic Crush = Static Crush Space + Dynamic Dash Intrusion




  • Load Distribution Philosophy

Transition zone bridges offset between load paths in crush zone & safety cage; enables effective load transfer & provide stability controls.



Comments

Post a Comment

If you have doubt then please let me know.

Popular posts from this blog

What is difference between FEM and FEA?

-
Image
Finite Element Method (FEM): Definition: FEM is a numerical technique used for solving problems related to engineering and mathematical physics. It's a broader concept and refers to the entire process of modeling a physical system or structure using finite elements. Process: The FEM involves discretizing a complex structure or system into small, simple shapes called finite elements. These elements are interconnected at points called nodes. Mathematical equations are then applied to each element to simulate the behavior of the entire structure. Application: FEM is a general approach and can be applied to various fields such as structural analysis, heat transfer, fluid dynamics, and electromagnetics. Finite Element Analysis (FEA): Definition: FEA is a specific application of the Finite Element Method. It is the process of using FEM to analyze and solve engineering problems. FEA focuses on the numerical simulation of physical phenomena by breaking down a complex system into finite...
Read more

Types of Elements in FEA

-
Image
I assume you already know the term "Meshing" in FEA. If you still want to read it then  you can visit below link of my previous article https://feadirect.blogspot.com/2020/05/what-is-meshing-in-fea.html Ok ! lets come to the point.  From the above image, you can imagine the representation of elements used in FEA. Here are the details : 1D Elements : 2 nodes It is also referred as line elements. Often used to represent the members, which are too long compared to the measurement of the cross section (L/r > 20). Useful when bending is the root cause of failure. Fundamental assumption : Changes in material properties along the cross section is negligible. Used to represent rods, beams, trusses, cables, frames etc. 2D Elements : 3, 4 nodes It is also referred as shell elements. Often used when thin sheet structures are under bending deformation. Can consider 2D stress conditions and bending and shear deformations. Fundamental assumptions : Changes i...
Read more

What is Meshing in FEA ?

-
Image
In Finite Element Analysis (FEA), meshing is a crucial step in the simulation process. It involves dividing a complex geometry into smaller, simpler elements, creating a mesh. Each element represents a portion of the overall structure, and together they form a discretized approximation of the entire model. The primary goal of meshing is to break down the complex geometry into manageable units, allowing the FEA software to analyze and simulate the behavior of the structure under various conditions. The elements in the mesh are interconnected at points called nodes, forming a network that represents the geometry and structure of the object being analyzed. There are different types of elements used in meshing, such as triangles, quadrilaterals, tetrahedra, hexahedra, etc., each suitable for specific types of analyses and geometries. The choice of element type and the density of the mesh (the number of elements) significantly impact the accuracy of the simulation. A fine mesh with smaller ...
Read more